Ready to use Zircon paste dedicated to superstructure joints filling during hot operations or cracked blocks repairs.
The Repair Joint Z Ready is a zircon based sealing and jointing product that combines the easiest application solution with the best refractory properties in compliance with the best EHS standards to improve the tightness or the lifetime of the different zones of your furnace.
Thanks to its pure zircon composition, it makes an excellent chemical barrier between silica walls and high alumina content walls.
It is also recommended for silica superstructures hot repairs.
Advantages
- Stable solution: To fill gaps up to 20mm (<1 inch) maximum during hot operations
- Longevity: During its setting and all along its lifetime, the Repair Joint Z Ready exhibits very little dimensions changes
- Ready to use product: The Repair Joint Z Ready does not need any specific preparation else than a re-homogenization stage
Dust free | Pumpable | Hot application | Fast heat up | Supervision |
![]() |
![]() |
![]() |
![]() |
![]() |
REPAIR JOINT Z READY
SCENARIO


This product fits perfectly to these furnaces
Container | Flat | Specialty | Insulation | Reinforcement |
![]() |
![]() |
![]() |
![]() |
![]() |
And these areas
Superstructure Regenerator chambers
Technical information
- Bulk density: 3,29 T/m3 (206 pcf)
- Open porosity: 21%
Packaging
![]() |
Buckets |
|
Chemical analysis
ZrO2 | SiO2 | Al2O3 | ||||
---|---|---|---|---|---|---|
Repair Joint Z Ready | 63% | 34% | 1.8% |